■FAS
Now Available for Order and Shipping
■GAL/AGAL
Orders: Now Open
Shipping Starts: July 2026 (Scheduled)
Designed for Reduced Weight and Easy Integration.
Switching to aluminum gearhead cases reduces weight by approx. 20 to 37%.
These models help lighten mounting frames and simplify equipment structures for conveyors, lifts, and other large pieces of machinery in particular. They also ease mounting work and enhance the freedom of equipment design.
Now available in G3L type 55 frame and FS type 55 frame for greater design flexiblity.
Benefits of Weight Reduction Using Aluminum
-
Eases and speeds up assembly work
-
Reduces equipment weight and
simplifies structures
-
Reduces greenhouse gas emissions
during part manufacturing processes
CO2 Reduction During Part Manufacturing Processes
CO2 Reduction During Part Manufacturing Processes
| Type | Power | Typical model weight | After switching to aluminum | Product weight-reduction ratio |
|---|---|---|---|---|
| GAL | 0.4kW | 52.5kg | 33.0kg | 37% |
| FAS | 60.5kg | 42.7kg | 29% | |
| GAL | 0.75kW | 61.0kg | 41.5kg | 32% |
| FAS | 68.5kg | 50.7kg | 26% | |
| GAL | 1.5kW | 64.0kg | 44.5kg | 30% |
| FAS | 74.5kg | 56.7kg | 24% | |
| GAL | 2.2kW | 71.5kg | 52.0kg | 27% |
| FAS | 85.0kg | 67.2kg | 21% |
Contributions to the SDGs
Reduce greenhouse gas emissions
Switching to aluminum materials is expected to reduce CO2 emissions during part manufacturing processes.
Improve packaging
Some wooden crates can be replaced with reinforced cardboard boxes.
This helps to simplify disposal and to ease handling.
Reducing gearmotor and reducer weight improves workability as well as equipment structures.
Eases and speeds up assembly work
Helps reduce the level of difficulty and danger for gearmotor mounting and removal in high places, and increases work speeds.
Reduces equipment weight and simplifies structures
Reducing gearmotor and reducer weight are also expected to simplify the frame and housing structures of the mating equipment, thereby further lightening the entire piece of equipment and increasing the freedom of equipment design.
Improved packaging !
New packing method facilitate handling and disposal
New packing method facilitate handling and disposal
Applicable models
GAL/AGAL
■Induction Gearmotor
3-Phase
1-Phase
Double Shaft Type / S-Type Reducer
■IPM Gearmotor
3-Phase
■Low Backlash High Precision Gearboxes for Servo Motor
* Items outlined in 
are limited torque types. Please make sure to check the allowable output shaft torque in the performance table.
FAS
■Induction Gearmotor
3-Phase
1-Phase
Double Shaft Type / S-Type Reducer
■IPM Gearmotor
3-Phase
* Items outlined in are limited torque types. Please make sure to check the allowable output shaft torque in the performance table.
Model change
GAL/AGAL
■Induction Gearmotor
■Double Shaft Type / S-Type Reducer
■IPMギアモータ
■High Precision Gearboxes for Servo Motor
FAS
■Induction Gearmotor
■Double Shaft Type / S-Type Reducer
■IPM Gearmotor
FAQs
Q. Will the mounting dimensions or basic performance change when switching to the aluminum case?
A. No. The mounting dimensions and basic performance remain identical to the conventional steel models.
Note: The external housing shape and appearance may vary depending on the model. Please refer to the details below.
● Replacing FS with FAS
Identical to the conventional models, including external dimensions and shape.
● Replacing G3L / AG3L with GAL/ AGAL
The mounting dimensions and basic performance remain identical. However, some changes have been made to the external dimensions and shape.
For detailed specifications, please refer to the outline drawings for each product.
